page 1 of 3 www.pduke.com 2014/4/30 fec30 series 30 watts dc-dc converter output specifications output power 30 watts, max. voltage accuracy 1% minimum load 0% voltage adjustability 10% line regulation ll to hl at full load single dual 0.2% 0.5% load regulation no load to full load single dual 0.5% 1% cross regulation (dual) asymmetrical load 25% / 100% fl 5% ripple and noise 20mhz bandwidth (measured with a 0.1 f/50v mlcc) see table temperature coefficient 0.02% / oc, max. transient response recovery time 25% load step change 300 s over voltage protection zener diode clamp 1.5vdc output 1.8vdc output 2.5vdc output 3.3vdc output 5vdc output 12vdc output 15vdc output 3.9vdc 3.9vdc 3.9vdc 3.9vdc 6.2vdc 15vdc 18vdc over load protection % of fl at nominal input 150%, max. short circuit protection continuous, automatics recovery general specifications efficiency see table isolation voltage input to output input (output) to case 1600vdc, min. 1minute 1600vdc, min. 1minute isolation resistance 500vdc 10 9 ohms, min. isolation capacitance 1000pf, max. switching frequency 300khz10%. safety approvals iec60950-1, ul60950-1, & en60950-1 case material nickel-coated copper base material fr4 pcb potting material epoxy (ul94 v-0) dimensions 2.00 x 1.60 x 0.40 inch (50.8 x 40.6 x 10.2 mm) weight 48g (1.69oz) mtbf (note 1) mil-hdbk-217f 1.283 x 10 6 hrs input specifications input voltage range 12vdc nominal input 24vdc nominal input 48vdc nominal input 9 ~ 18vdc 18 ~ 36vdc 36 ~ 75vdc input filter l-c type input surge voltage 12vdc input 24vdc input 48vdc input 36vdc 100ms,max 50vdc 100ms,max 100vdc 100ms,max input reflected ripple current 30map-p start up time nominal input and constant resistive load power up remote on/off 25ms 25ms start-up voltage 12vdc input 24vdc input 48vdc input 9vdc 17.8vdc 36vdc shutdown voltage 12vdc input 24vdc input 48vdc input 8vdc 16vdc 33vdc remote on/off (note 6) (positive logic) dc-dc on dc-dc off open or 3.0v < vr < 12v short or 0v < vr < 1.2v input current of remote control pin remote off state input current nominal input nominal input -0.5ma ~ 0.5ma 2.5ma environmental specifications operating ambient temperature -40oc ~ +85oc (with d erating) maximum case temperature 100oc storage temperature range -55oc ~ +125oc over temperature protection 115oc thermal impedance (note 7) natural convection natural convection with heat-sink 10oc/watt 8.24oc/watt thermal shock mil-std-810f vibration mil-std-810f relative humidity 5% to 95% rh emc characteristics emi (note 8) en55022 class a, class b esd en61000-4-2 air contact 8kv 6kv perf. criteria b radiated immunity en61000-4-3 10 v/m perf. criteria a fast transient (note 9) en61000-4-4 2kv perf. criteria b surge (note 9) en61000-4-5 1kv perf. criteria b conducted immunity en61000-4-6 10 vr.m.s perf. crite ria a t e c h n i c a l s p e c i f i c a t i o n all specifications are typical at nominal input, ful l load and 25oc otherwise noted features ? 30 watts maximum output power ? output current up to 6a ? standard 2.00 x 1.60 x 0.40 inch package ? high efficiency up to 90% ? 2:1 wide input voltage range ? six-sided continuous shield ? fixed switching frequency ? offer single and dual output ? ul60950-1, en60950-1, & iec60950-1 safety approvals ? ce marked ? compliant to rohs ii & reach description the fec30 series offer 30 watts of output power from a 2.00 x 1.60 x 0.40 inch package. the fec30 series with 2:1 wide in put voltage of 9~18vdc, 18~36vdc and 36~75vdc and features 1600vdc of isolation, short-circuit and over-voltage protectio n. applications wireless network telecom/datacom industry control system measurement equipment semiconductor equipment
page 2 of 3 www.pduke.com 2014/4/30 fec30 series 30 watts dc-dc converter fec30-48s05 derating curve 0 20 40 60 80 100 120 -40 -20 0 20 40 60 80 100 120 ambient temperature( ) o u t p u t p o w e r (% ) 62.9 fec30-48s05 derating curve with heatsink (note 4 ) 0 20 40 60 80 100 120 -40 -20 0 20 40 60 80 100 120 ambient temperature( ) o u t p u t p o w e r (% ) 69.4 output current model number input range output voltage min. load full load output ( 2 ) ripple & noise no load ( 3 ) input current eff ( 4 ) (%) capacitor ( 5 ) load max fec30-12s1p5 9 ~ 18 vdc 1.5 vdc 0ma 6000ma 50mvp-p 100ma 78 8580 0 f fec30-12s1p8 9 ~ 18 vdc 1.8 vdc 0ma 6000ma 50mvp-p 100ma 81 65000 f fec30-12s2p5 9 ~ 18 vdc 2.5 vdc 0ma 6000ma 50mvp-p 110ma 83 3300 0 f fec30-12s3p3 9 ~ 18 vdc 3.3 vdc 0ma 6000ma 50mvp-p 115ma 85 19500 f fec30-12s05 9 ~ 18 vdc 5 vdc 0ma 6000ma 50mvp-p 95ma 87 10200 f fec30-12s12 9 ~ 18 vdc 12 vdc 0ma 2500ma 75mvp-p 170ma 88 3240 f fec30-12s15 9 ~ 18 vdc 15 vdc 0ma 2000ma 75mvp-p 210ma 88 1100 f fec30-12d12 9 ~ 18 vdc 12 vdc 0ma 1250ma 100mvp-p 60ma 87 1020 f fec30-12d15 9 ~ 18 vdc 15 vdc 0ma 1000ma 100mvp-p 40ma 87 675 f fec30-24s1p5 18 ~ 36 vdc 1.5 vdc 0ma 6000ma 50mvp-p 50ma 80 85800 f fec30-24s1p8 18 ~ 36 vdc 1.8 vdc 0ma 6000ma 50mvp-p 35ma 82 65000 f fec30-24s2p5 18 ~ 36 vdc 2.5 vdc 0ma 6000ma 50mvp-p 45ma 84 33000 f fec30-24s3p3 18 ~ 36 vdc 3.3 vdc 0ma 6000ma 50mvp-p 50ma 86 19500 f fec30-24s05 18 ~ 36 vdc 5 vdc 0ma 6000ma 50mvp-p 50ma 88 10200 f fec30-24s12 18 ~ 36 vdc 12 vdc 0ma 2500ma 75mvp-p 80ma 89 3300 f fec30-24s15 18 ~ 36 vdc 15 vdc 0ma 2000ma 75mvp-p 90ma 89 1100 f fec30-24d12 18 ~ 36 vdc 12 vdc 0ma 1250ma 100mvp-p 30ma 88 1020 f fec30-24d15 18 ~ 36 vdc 15 vdc 0ma 1000ma 100mvp-p 30ma 88 675 f FEC30-48S1P5 36 ~ 75 vdc 1.5 vdc 0ma 6000ma 50mvp-p 20ma 81 85800 f fec30-48s1p8 36 ~ 75 vdc 1.8 vdc 0ma 6000ma 50mvp-p 20ma 83 65000 f fec30-48s2p5 36 ~ 75 vdc 2.5 vdc 0ma 6000ma 50mvp-p 25ma 85 33000 f fec30-48s3p3 36 ~ 75 vdc 3.3 vdc 0ma 6000ma 50mvp-p 30ma 87 19500 f fec30-48s05 36 ~ 75 vdc 5 vdc 0ma 6000ma 50mvp-p 35ma 89 10200 f fec30-48s12 36 ~ 75 vdc 12 vdc 0ma 2500ma 75mvp-p 35ma 90 3300 f fec30-48s15 36 ~ 75 vdc 15 vdc 0ma 2000ma 75mvp-p 55ma 90 1100 f fec30-48d12 36 ~ 75 vdc 12 vdc 0ma 1250ma 100mvp-p 20ma 88 1020 f fec30-48d15 36 ~ 75 vdc 15 vdc 0ma 1000ma 100mvp-p 20ma 88 675 f fec30-48s05 efficiency vs input voltage 80 82 84 86 88 90 92 36 40 44 48 52 56 60 64 68 72 input voltage (v) eff ic ie n c y (% ) fec30-48s05 efficiency vs output load 45 50 55 60 65 70 75 80 85 90 95 10 20 30 40 50 60 70 80 90 100 output load (% of full load) e f f i c i e n c y ( % ) note 1. mil-hdbk-217f @ta=25 oc, full load. 2. typical value at nominal input and full load. (2 0mhz bw.) 3. typical value at nominal input and no load. 4. typical value at nominal input and full load. 5. test by minimum input and constant resistive loa d. 6. the ctrl pin voltage is referenced to -input. 7. heat-sink is optional and p/n: 7g-0011c-f. 8. the fec30 series standard module meets en55022 c lass a and class b with external components. for more detail information, please contact with p- duke. 9. an external input filter capacitor is required i f the module has to meet en61000-4-4, en61000-4-5. the filter capacitor power mate suggest: nippon che mi-con ky series, 220 f/100v. caution: this power module is not internally fused. an inpu t line fuse must always be used. (note 7)
page 3 of 3 www.pduke.com 2014/4/30 fec30 series 30 watts dc-dc converter mechanical drawing pin connection pin single dual 1 + input + input 2 - input - input 4 ctrl ctrl 5 no pin + output 6 + output common 7 - output - output 8 trim trim external output trimming output can be externally trimmed by using the metho d shown below. ( ) for dual output trim 7(7) 8(8) trim up r u 8(8) 6(5) trim down r d 1. all dimensions in inch (mm) tolerance: x.xx0.02 (x.x0.5) x.xxx0.01 (x.xx0.25) 2. pin pitch tolerance 0.01 (0.25) 3. pin dimension tolerance 0.004 (0.1)
|
